Installation Steps for the Nokia 5310
For 1st time set up instructions only:

Bluetooth has to be on before you do the below steps
A) Hold down the black button on the front for the Bluetooth for a couple of seconds until it is flashing green.
B) On the side of the Bluetooth headset you have to hold the -/+ sign together (use 2 fingers) for a couple of seconds (count to 5) until it begins flashing
green & red which means you have paired your phone. 

1. Click on Menu

2. Click on Settings

3. Click on Connectivity

4. Click on Bluetooth and turn it on

5. Set phone visible to all searching devices – click on Yes

6. Paired new devices – search - yes

7. Click on yours HBH-PV703

8. Password is always 0000 (shows up as xxxx)

9. It will say allow this device to connect auto choosing – click yes – press connect

10. Make a call - you are now able to make a call and use your Bluetooth headset

11. Once you have paired your phone; you will show the Bluetooth symbol on the top of your phone at all time – when it is not there; you will have to pair your phone and do the above steps again – check active devices to see if you have your Bluetooth device active

12. To disconnect – just hold down the silver smiley face until it turns off and it will say “disconnected on your cell phone”

*To increase or decrease volume use the +/- on the sides of the Bluetooth.

Top

Installation Steps for the Nokia 6085
For 1st time set up instructions only:

Bluetooth has to be on before you do the below steps
A) Hold down the black button on the front for the Bluetooth for a couple of seconds until it is flashing green.
B) On the side of the Bluetooth headset you have to hold the -/+ sign together (use 2 fingers) for a couple of seconds (count to 5) until it begins flashing
green & red which means you have paired your phone. 

1. Click on Menu

1. Click on Settings

1. Click on Connectivity

1. Click on Bluetooth and turn it on

1. Set phone visible to all searching devices – click on Yes

1. Paired new devices – search - yes

1. Click on yours HBH-PV703

1. Password is always 0000 (shows up as xxxx)

1. It will say allow this device to connect auto choosing – click yes – press connect

1. Make a call - you are now able to make a call and use your Bluetooth headset

1. Once you have paired your phone; you will show the Bluetooth symbol on the top of your phone at all time – when it is not there; you will have to pair your phone and do the above steps again – check active devices to see if you have your Bluetooth device active

1. To disconnect – just hold down the silver smiley face until it turns off and it will say “disconnected on your cell phone”

*Remember when the flashing light is only blue – you will have to hold it down until its red & blue in order for Bluetooth to be connected.

Top

Installation Steps for the Motorola W510
For 1st time set up instructions only:

Bluetooth has to be on before you do the below steps
A) Hold down the black button with a line on it on the front of the Bluetooth for a couple of seconds until it is flashing green.
B) On the side of the Bluetooth headset you have to hold the -/+ sign together (use 2 fingers) for a couple of seconds (count to 5) until it begins flashing
green & red which means you have paired your phone. 

1. Click on Menu

1. Click on Bluetooth Link symbol (blue & white symbol)

1. Click on Add Audio Device

1. When search has been completed it will show you all Bluetooth’s in the area that have been

1. Click on yours PV703 and it will start connecting

1. If asked password is always 0000

1. It will say “pairing automatically completed”

1. Make a call - you are now able to make a call and use your Bluetooth headset

1. Once you have paired your phone; you will show the Bluetooth symbol (blue & white) on the top of your phone at all time – when it is not there; you will have to pair your phone and do the above steps again

1. Once you have paired your phone; you will show the Bluetooth symbol (blue & white) on the top of your phone at all time – when it is not there; you will have to pair your phone and do the above steps again

*Remember when the flashing light is only blue – you will have to hold it down until its red & blue in order for Bluetooth to be connected.

Top